Saint-Gobain provides its technological and industrial expertise to the development of solar energy in Saudi Arabia
- Saudi Arabia: Saturday, October 20 - 2012 at 16:48
- PRESS RELEASE
Saint-Gobain, represented by Jean-Pierre Floris, Senior Vice-President and President of the Innovative Materials Sector has signed an M.O.U. with HRH Prince Faisal Bin Salman Bin Abdulaziz Al Saud, to set up a high-tech company in the solar energy sector in Saudi Arabia.
Under the terms of the Memorandum, Saint-Gobain shall provide technical assistance and engineering expertise to build and operate a CIGS (Copper, Indium, Gallium, Selenide) thin film PV module manufacturing facility in KSA. This project is part of a larger program which includes the construction of solar power plants in the Kingdom.
This strategic alliance will lay the foundation for other businesses in the field of solar. Furthermore, it will accelerate the development of solar power plants equipped with modules manufactured in Saudi Arabia using Avancis CIGS technology. The solar electricity generated using sunlight could lead to a reduction in the consumption of crude oil. Fully aligned with K.A.CARE's* strategic priorities, this program will enable the development of a competitive manufacturing base in the Kingdom. K.A.CARE has been established in April 2010 by Royal Decree and is in charge of developing nuclear and renewable energy in the Kingdom. It has set itself the target to install 41 GWp of solar power by 2032 - of which 16 GWp should be contributed by PV power generation.
"We are very honored to work together with HRH Prince Faisal, leveraging our technology and manufacturing expertise to make solar energy a competitive source of electricity for the Kingdom. The cost of the electricity produced in this way will have a very strong local content," commented Jean-Pierre Floris.
HRH Prince Faisal emphasized the Kingdom will benefit in two different ways as a result of this partnership. "On the one hand, it is going to result in an alternative and efficient way of producing electricity and on other hand, the introduction of very innovative technology to the Kingdom of Saudi-Arabia will be the outcome."
Based on depositing CIGS thin films on a glass substrate, the technology developed by Avancis avoids using traditional crystalline silicon, enabling low production costs, like other thin-film based techniques, while its electrical efficiency (over 12% industrially and up to 20% in laboratory) is comparable to the higher yields produced by polycrystalline silicon modules. Easy-to-mount, attractive and reliable, CIGS thin-film based modules are recommended for both solar fields and rooftop installations.
Articles in this section are primarily provided directly by the companies appearing or PR agencies which are solely responsible for the content. The companies concerned may use the above content on their respective web sites provided they link back to http://www.ameinfo.com
Any opinions, advice, statements, offers or other information expressed in this section of the AMEinfo.com Web site are those of the authors and do not necessarily reflect the views of AME Info FZ LLC / 4C. AME Info FZ LLC / 4C is not responsible or liable for the content, accuracy or reliability of any material, advice, opinion or statement in this section of the AMEinfo.com Web site.